DNAKE IP video intercom registered to 3CX

Although DNAKE IP Video Intercom is not officially certified by 3CX. But as long as it supports the standard SIP protocol, you can successfully register to the 3CX system by manually filling in the 3CX extension account into the DNAKE IP video intercom.

1、Create 2 extensions in 3CX for use by DNAKE IP Video Intercom. The authentication ID and password of the 3CX extension are shown in the figure below:

2、Access the web interface of DNAKE IP Video Intercom and fill in the information of the 3CX extension. As shown below:

3、After filling in the information referring to the above figure, click “Submit” to submit the registration. Then go to the homepage to confirm whether the registration is successful. As shown below:

4、Set the forwarding number. So that the intercom device can call the 3CX extension. As shown below:

5、Access the web interface of DNAKE IP Indoor Station and register 3CX extension. As shown below:

6、After filling in the information referring to the above figure, click “Submit” to submit the registration. Then go to the homepage to confirm whether the registration is successful. As shown below:

After both devices are registered successfully. You can test the call to confirm whether the call is normal. When the DNAKE IP Video Intercom dials the DNAKE IP Indoor Station, the DNAKE IP Indoor Station can preview the video screen of the DNAKE IP Video Intercom.

Known issues:

After the DNAKE IP Indoor Station is restarted, the video preview function temporarily fails, and it will be normal in about ten minutes. Because the DNAKE intercom equipment has not been officially certified and tested by 3CX, there may be some compatibility problems.